We produce POT BEARINGS which includes sliding guided pot bearings, fixed pot bearings and along with these we also have free sliding pot bearing for the very first time in South India at our plant which is based out in Hyderabad. The Pot Bearing design is actually based on the computation of IRC : 83 (Part III) - 2002.
The elementary or key elements of a Pot Bearing is generally made up or comprised of a shallow cylinder which is also known as a pot, and an elastomeric pad which is generally called as a disc. Also note that it also has a single or set of sealing rings, along with pistons and a variety of sliding surfaces. These Masonry plates and the base plates are common tools which are utilized for the basic installation of the pot bearings, as these base plates permits the attachment of the bearings and also help upsurge the support area taking place on the pier and the abutment. These Pot bearings are generally fixed in contrast to all kinds of translation unless they are utilized with a PTFE sliding surface.
Various kinds of Pot Bearings which are manufactured by us are mentioned as below :
- Fixed pot bearings.
- Guided Sliding pot bearings.
- Free Sliding pot bearings.
The main elements of our pot bearings is surface cylinder acknowledged as pit, an elastomeric pad regarded as disc as well as a set or single siding surfaces, piston and sealing rings. Base plates and masonry plates are normal for introduction of our bearings, as these permit association of bearings that enhance the reinforcement area on abutment and the pier. Our bearings are attached against every translation unless these are deployed with sliding surfaces of PTFE.
Piston and Pot:
Our pot bearings are produced deploying stainless steel pistons and structural carbon steel. Integrated sealing rings are made of brass that is most imperative part of our bearings for their prolong services, which are compulsory system adhered by our company.
In our bearings upright load was operated through bearings piston and is impaled by compressive pressure in elastomeric pad that is deformable yet mostly in compressible and also, idealized as be possessing hydro statically, however, in virtual exerts shear compression.
Outer safety rubber dust seals:
These seals are provided on every bearing, impeding penetration of debris such as water, dirt, etc. that can harm brass sealing rings and elastomeric pad, offering substantial advantages.
Sorts of bearings made by our company:
- Fixed pot bearings
- Sliding free pot bearings
- Guided sliding pot bearings
- Our pot bearings are considered when bearing revolutions are huge, long term serviceability and compact outlines are demanded
- These offer prolonged working life and smaller size as contrasted to elastomeric bearings
- They has prolonged handling time
- Have sustainability of numerous cycles of large and extremely small rotations
- Inexpensive repair as substitution of elastomer disc is only demanded
- Have resistivity against outer atmospheric correction
Additional Fixtures for Bearings:
Extra fixtures such as base plates, studs, PTFE sliding bearings, welded studs masonry plates, temporary bearings and more will be obtained for customers complete demands.
5-5-65/1/A, F-14, S.A.Trade Center, First Floor, Ranigunj, Secunderabad, Telangana, 500003, India